Honda 03 vtx 1800 c oil presure light will not come on with key on --new led did not fix the light --oil presure switch will open and close--anyone know of a place that could  fix the circuit board---thanks eddie :  

HI; I have repaired some boards. Some aren't easy due to the size of the circut. You might try to check with an ohm meter the continuity of the board. Once you have located the open solider it up. IF it is bad your going to need a new one anyway. You could all so install a oil psi sw. Then wire in a aux lite. Good luck on the lite...scruffy  

scruffy thanks for the reply in doing the alux light i found that the wire connection up at the raditor had slid back in the rubber just enought to not make contact found that the led lights work by grounding to frame. it sure was nice to know that there are riders that are willing to help.  thanks eddie  p s all is well now