Pipes for a M50 Boulevard

G'day my name is Peter form Australia  l was wondering f anyone knows if you can get a good sound out of the m50 boulevard l'm picking a new one up tomorrow and from what l have read they have the crane angles at 45 degree's as well as the v twin is set at 45 this l here takes a lot of the vibration out of the bike but might also effect the typical deep sound that one gets any help on this would be much appreciated  

Hi from the USA. I have a C50T 2005  I also wanted a deeper sound than the stock. I removed the baffles out to the stock pipes. There are three of them. I used a 3in. hole saw to cut out the weld just inside the pipes. The second one is about 4in. behind the first. Then the third behind that about 6in.I haven't looked at the M50 pipes I bet there close to the same. To get more information go to this site. VolusiaRider.com This is a great spot. New pipes cost between 350$$$and 600.00$$$. scruffy... Have fun with your new bike..  

Thanks for the tip scruffy have my bike now and done 245 klm's and enjoying ever minute will wait untill my first service than after that might look at getting some slash cut pipes .
How does your bike sound now that you have done the baffle mods ?